Memphis Auto Repair

Your vehicle may be wearing boots right now and you might not even know it.  They're called ball joint boots.  They're actually protective, flexible things that protect parts of your suspension (called ball joints) from all the hazards the road can fling at them.  If one of those ball joint boots fails and you don't get it replaced, the ball joints themselves could wind up failing, a repair that can be even more expensive.  Ball joint boots not only keep things like rocks, salt, water and dirt out of your ball joints, they also help the ball joints keep their lubrication inside and working properly.  To do that, the boots have to be made of a flexible material, sometimes rubber, sometimes a synthetic.  They do take a beating, exposed to temperature extremes and debris, and eventually they can tear or crack just because of their age.  Unless someone is keeping an eye on your ball joint boots, you may never know there's a problem.  That's why when ... read more

You've probably had your Check Engine Light go on.  Then it goes off and you figure, hey, whatever the problem was, it's gone now and I don't have to worry about it.  Well, the problem may have gone away and it may not have. Your vehicle likely has one of these warning lights on the instrument panel: an amber light that looks like an engine or reads "Check Engine" or "Service Vehicle Soon."  If that light comes on and stays on, it usually means there's something amiss but not urgently in need of service.  (Now if it's blinking, that's another story that we'll deal with in a minute.) Sometimes when it comes on and stays steadily lit, the problem will go away and the light will go out.  Sometimes it will stay on until you get the problem fixed.  Either way, the engine's computer will store a code that can provide clues to what's not working—or wasn't working—the way it's supposed to. If you are just dying to know what that code is, you can buy a ... read more

The other day, a driver was trying to open his vehicle's hood so he could add some windshield washer fluid.  But when he pulled the hood release inside the car, nothing happened.  Usually, opening any hood is a 2-step process.  You pull the hood release (which is usually a handle under the dashboard to the left of the steering column) and listen for the hood to pop up slightly. (It doesn't open all the way because it has a safety latch to prevent you from accidentally opening it up while you're driving.) Then, you get out and find the latch, usually through the grille near the hood.  There's a little handle on it which you push, slide or pull (there are a few different types) at which point the hood can be opened up all the way.  But in this driver's case, the hood would not release at all when he pulled the handle inside.  Not knowing what to do, he called his service advisor, who told him to bring it over.  The reason? A hood with a broken latch cou ... read more

You know your body temperature is supposed to be 98.6 degrees F, 37 degrees C.  Your vehicle has a normal temperature, too, and if you pay attention to it, that can save you some big headaches down the road. Many vehicles have a temperature gauge on the dash that takes the temperature of the engine's coolant.  Some have a thermometer symbol, some read C-H (cold to hot). Many will have a red zone that shows when water temperature is getting into the danger zone.  Others are digital and have a red warning light that signals overheating.  And some vehicles have a light that goes on when the engine temperature is out of the normal range. If your vehicle has a gauge, pay attention to it.  If you need help locating it, ask one of our Allen's Automotive Center experts to give you a quick explanation.  Chances are when the vehicle has been running for 15 minutes or more, the temperature gauge will settle into its own "normal" zone, often just below the midway poin ... read more

We've all heard that expression, "That's a non starter." When it comes to your vehicle, that's not music to a driver's ears. That sickening sound when you start the ignition and instead of hearing the engine crank, you hear it slowly turn over and your dash lights go dim.  There can be many reasons a vehicle won't start, so here's a little history of how the starter came to be an important component of modern vehicles. You have to move the engine's components to start it. The first cars had a crank that the driver would insert into the front, then start turning things over by hand.  When the engine started, you had to release that crank immediately or risk a broken arm.  Yes, it happened many times.  So, they came up with a better idea: an electric starter, which was a big advance in automotive technology. With this system, an electric motor rotated a series of gears that turned the gasoline engine's crankshaft so its pistons and parts moved and the engine drew in a ... read more