Memphis Auto Repair

Your vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite.  It’s a precise operation, and when it’s working well, you have plenty of power and an efficient engine. But after time, contaminants in the fuel system may prevent the injectors from spraying like they’re supposed to.  They can also shoot contaminants into the engine.  One sign that could point to dirty fuel injectors is a misfiring engine. Misfires can be caused by several things, so it’s a good idea to bring your vehicle to us so we can trace the cause. Another sign is that your fuel economy has gone downhill or your engine doesn’t have the “pep” it used to. If we discover that your injectors are clogged or not working the way they should, we can clean them to get rid of those contaminants to restore your engine to its top performance.  When you brin ... read more

After months of postponing travel far away from home, a lot of us can't wait to hit the road and scream "Road Trip!" again.  But how long has it been since the vehicle you're planning on taking has had a thorough inspection? And is it roadworthy for several days on the highway? Time to schedule a professional trip inspection in our service center.  When it comes to long trips, before you go, make sure you can stop.  We can perform a break inspection.  Our technician will visually inspect your brakes for wear and how much life is left in the brake pads and rotors.  They'll also check your brake lines and fluids for fitness and fill. If it's going to be a long trip, it's important that your engine stays lubricated.  The technician will see when the last time you had an oil change, check the levels and inspect the system for leaks.  If you are close to needing an oil change, it's best to have it done before the trip because no one wants to interrupt a va ... read more

It's easy to get letters like PVC and PCV mixed up.  PVC is a plastic that's used in a lot of things, especially plumbing pipes.  And PCV is a valve that helps your engine burn off excess fumes rather than having them pollute our atmosphere.  PCV stands for positive crankcase ventilation.  When your engine ignites gasoline in the cylinders, some of the gases produced make their way into the crankcase, where oil is held to lubricate the engine.  In earlier days, those gases would be vented out through a hose and go directly into the air.  It was a waste of gasoline (since about three-fourths of the gases were unburned fuel) and a nasty source of pollution. So engineers devised a one-way valve that directed those gases back into the engine's air intake system to be burned again.  After a while, the PCV valve can get clogged up with gummy oil.  Not only does that reduce the recirculation of the gases, but it can also cause pressure in the crankcase ... read more

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape.  Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly. These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they ... read more

You might be familiar with brake pads and rotors, two components of your vehicle's brakes that have to be regularly serviced.  Here's another important component of your brakes: the calipers. Calipers are used in disc brakes, the type of brakes now found in most recently manufactured vehicles.  A caliper is the part of the brakes that squeezes the brake pads against the discs, or rotors, which turn with your wheels.  There are different kinds of calipers, but the basic principle is the same.  You press down the pedal, brake fluid activates a piston or pistons that squeeze the brake pads against the disc and the friction slows down your vehicle. While modern vehicles have a warning system to let you know it's time to get your brakes checked, your brake light usually goes on when your fluid level is low or your fluid pressure is low.  But you may have to look out for signals your calipers are the problem.  If your vehicle pulls to one side when you brake, th ... read more