Memphis Auto Repair

When you start your vehicle’s engine, there’s another motor that makes that whole process possible.  It’s called the starter, and it’s a small electric motor that gets your vehicle running.   As you can imagine, it’s quite a chore for a little electric motor to turn over the big engine that powers your vehicle.  And after hundreds of successful starting missions, after a while, it will start to give out. You’ll know the starter is starting to give up the ghost when it turns too slowly or sometimes doesn’t do anything when you turn on the ignition.  Maybe it makes funny noises like grinding when you try to start your vehicle or maybe there’s just a click. Those are all reasons to get your vehicle over to us so we can see what’s going on.  A technician will make sure the problem is the starter and not in the battery, a switch, or other electrical component or connections.  If all of those are ruled out, y ... read more

A driver called in to the shop the other day saying his European sports sedan had an odd problem.  He was driving when his car started to slow down.  Applying more throttle didn't help.  He pulled over to the side of the road, shut the engine off and waited a few minutes before starting it up again.  It ran fine… for a couple of minutes.  Then the same thing happened.  He was able to finally get home by stopping and restarting, and he was calling to see if we could take a look at it.  Turned out it was one of his car's fuel filters that choked up with debris so badly that enough fuel couldn't get through it.  When he stopped the car, enough fuel could flow through the unpressurized fuel line to supply enough fuel for a couple of minutes when he restarted his car. But then the pressure would cause things to clog again.   There are other symptoms that point to a failing fuel filter. Perhaps your engine misfires, your vehicle is hard to ... read more

You may have heard about an important part of your vehicle's engine called a timing belt, and many know that if that belt breaks, it can cause some very serious engine problems.   Not all vehicles have them, and the ones that do generally have smaller engines.  The timing belt keeps the engine synchronized so that every time a spark plug fires, the crankshaft, camshaft, pistons, and valves are all working together.  Timing belts will eventually have to be replaced, and most vehicle manufacturers recommend when that should be.  Typically, it's around every 60,000-100,000 miles, or 100,000-160,000 km. It's a good idea to stick to your vehicle's schedule or be alert for signs that the timing belt may be failing prematurely. Some of those symptoms? Maybe your engine won't even turn over when you try firing it up. You might hear a ticking or banging sound under the hood.  Perhaps you spot an oil leak or notice the engine misfiring.  If any of those are happenin ... read more

See if any of these are happening to your vehicle.  You feel it vibrating excessively underneath when it’s running, or you hear strange clunking, grating, or grinding sounds coming from beneath.  Maybe it’s hard to turn your vehicle, or you can hear squeaking when you’re going slow.  Perhaps you feel a shudder when you step on the throttle.   Any of those could be signs that your vehicle’s driveshaft might need lubricating, and it’s important to have one of our technicians check it out. Your vehicle’s engine puts out a lot of twisting power.  That force is called torque, and the driveshaft is the part that handles the job of transferring all that torque from your engine to the wheels.  If it’s a four-wheel or all-wheel drive vehicle, it will have driveshafts front and rear.  Some driveshafts have different segments which are connected by couplings called U-Joints.   So that everything can glide along fine ... read more

Steering a vehicle these days doesn't take much effort, but if you got behind the wheel back before power steering was invented, you'd need to practically have the strength of Hercules to turn the wheel.    The first power steering systems widely available changed everything.  Chrysler introduced its Hydraguide power system in 1951. The "hydra" was for a hydraulic pump. It pressurized fluid that multiplied the force applied to the steering wheel so it was easier to turn the wheels on the ground. That pump got power from a belt attached to the engine, but unfortunately it wasted a lot of energy in the process. Plus, the system of hoses and pumps required a fair amount of maintenance and repair. Some say this system provides the most "natural" steering experience of power systems. Recently, automakers have turned to electric power steering.  It gets its power from the car's electrical battery and charging system and uses an electric motor to turn the wheels.  Sin ... read more